16 AWG Anodized Aluminum Jump Rings with Metric ID

Free economy shipping on retail orders over $99 (US only)

Sku: AA16A


Our Jump rings are anodized before they are cut so the ends are raw aluminum however with the coating thickness we use and with the thin blades we cut our Jump rings with, if you close the rings properly the seam can not be seen.

 Our Anodized Aluminum Jump rings are anodized in house at our sister company, Premier Anodizing & Metal Finishing. This assures that we will never be out of stock of a color and that we have control over our quality.  However, the colors can change slightly from batch to batch. We use a spectrometer to get the closest color matches possible but there still can be some differences, this is normal in the anodizing process. Therefore, you should order enough jump rings to finish your project all at the same time. FDA Approved - The anodizing process we use is FDA approved for cookware. Premier Anodizing uses only organic dyes and is rated non-hazardous.

 Jump Ring Weight - Anodized Aluminum Jump rings are lighter weight than Enameled Copper Jump rings. The coating is fairly hard but it can be scratched with steel.

Anodized Aluminum Jump Rings - Specifications

Our jump rings follow the American Wire Gauge (AWG), also known as Brown and Sharpe (B&S). All sizes listed are inside diameter (I.D.), which corresponds to the size of the mandrel onto which the wire is wound. Use these I.D.'s as a guide not an absolute as springback can occur.

AWG Wire Measurements
Size Inches (Imperial) Millimeter (Metric)
20awg (Aluminum) .035" .9mm
20awg (Other Metals) .032" .8mm
18awg .040" 1.0mm
16awg 3/64" 1.2mm
14awg 1/16" 1.6mm
12awg .079" 2.0mm
If you are use to SWG (Standard Wire Gauge) sizing that some other vendors use.
Please contact us for help before choosing your ring gauge.

Anodized Aluminum Jump Rings - Approximate Jump Rings Per Ounce Chart

Approximate Rings per Ounce Chart (PDF)


11 Reviews Write a review

  • Ashley Sullivan

    Love these rings

    May 29th 2017

    I love these rings, they're easy to work with and lightweight. I've tried many of the different colors for these rings and love them all. The only issue I had was the tiffany blue rings scratching easily so the end product ends up looking a little sloppy.

  • V.A.K.

    holy cobalt!

    Jun 3rd 2016

    I ordered the cobalt anodized aluminum rings to make a byzantine weave bracelet for a friend who's favorite color is blue. I opened the box and immediately decided cobalt blue is my favorite color now, too! The color is so vibrant and beautiful!! I ended up doing a couple of inches of the weave in just the cobalt to show it off in her bracelet (she wanted silver and blue). And, the rings are quite a bit stronger than the copper, which tends to be my preference to work with. I understand why there's such a high demand for these, now! They're just wonderful.