|18g Niobium (1.0mm Wire Diameter)|
|Inside Diameter||Aspect Ratio||Rings Per Ounce|
If you are used to SWG (Standard Wire Gauge) and need help choosing an
AWG (American Wire Gauge) ring size, please visit our FAQ.
Niobium Jump Rings - Color
Niobium is a reactive metal. It receives its color due to anodizing with electricity. Batches of Niobium can be slightly different colors, just like dye lots, so be sure to purchase enough rings at one time to complete your project.
Since both electricity and light angle effect the color of Niobium, different sizes may not match exactly. Also, different gauges will look slightly different as the thickness of the different gauges reflect the light at different angles.
There can be a variation of color occurring in varying amounts from ring to ring and from batch to batch with Niobium. This color variation is a feature property that adds to the beauty of Niobium.
We anodize the rings after they are cut, so the color completely covers the ring, even the cut end.
Niobium Jump Rings - Cleaning
Oils from the skin can make your Niobium seem dull. To clean Niobium, use a window cleaner (such as Windex) to polish. Rinse and dry your piece completely to bring back the shine.
Niobium Jump Rings - Specifications
Our jump rings follow the American Wire Gauge (AWG), also known as Brown and Sharpe (B&S). All sizes listed are inside diameter (I.D.), measured in millimeters which corresponds to the size of the mandrel onto which the wire is wound. Use these I.D.'s as a guide not an absolute. The wire used to make our jump rings is of extremely high quality and made using an IOS-Certified production process. However, like all wire, there may be slight tolerances in size. Wire diameter may vary up to 0.03mm (0.0012”) larger or smaller than the listed size.
Occasionally you might get a misshapen ring or an end cut half ring. To account for this, we put extra rings in every bag.
Niobium is not available for returns or exchanges